KINGHOME Ultra Heat R32 5-Zone Heat Pump | 60,000 BTU | Montréal, Laval, South Shore, North Shore
The Kinghome Ultra Heat 5 zones 60 000 multi-zone heat pump heats and cools 5 rooms with a single outdoor unit. it delivers 41,000 BTU/h at −8 °C, heats down to −30 °C and has an indicative LogisVert amount of $2,050 (only Hydro-Québec confirms the assistance granted). Installed by AirGreen in Montréal, Laval, Longueuil, the North Shore and the South Shore.
5 rooms, one outdoor unit.
Figures come from the manufacturer’s data and the AHRI certification.
The parts that make a multi-zone system.
Tap a part to learn more.
Outdoor unit
One compressor for the whole house. It supplies up to 6 heads.
Base pan heater
A heater keeps the outdoor unit’s base pan free of ice below 1 °C and during defrost (NEEP).
Refrigerant lines
One pair of lines per head.
Indoor heads
One head per room, each with its own remote and temperature. The combination is chosen in the “Zones” menu.
Control
Each zone is set separately, also from your phone.
Turn rooms on and off. Watch the power being shared.
One outdoor unit supplies every head: when several rooms call at once, they share its capacity. Pick an outdoor temperature.
Tell us your rooms. We tell you if this size is enough.
Pick the number of rooms and their size. The estimate targets a −15 °C day; it is a guide, the real calculation is done room by room at your home.
The whole series at a glance: find the box that fits you.
Each box is a product: the outdoor unit’s size, and the number of heads.
At −15 °C, it still delivers 60 % of its rated capacity.
Tap a temperature: capacity, efficiency and the cost of one hour of heating.
At every temperature, cheaper than baseboards.
Cost of one hour at full output, for the same heat delivered. Hydro-Québec Rate D, second tier: 11.142 ¢/kWh.
The official ratings, on the same scales as before.
SEER2, HSPF2 and EER2 come from the AHRI certification.
A grant you can calculate, not guess.
The capacity at −8 °C. $50 per 1,000 BTU/h is the rate for ENERGY STAR heat pumps (guide v1.10).
One multi-zone or several wall units? Both sides, honestly.
We compare both options on your floor plan during the estimate.
What to know before installing a multi-zone system.
Dimensions, wiring and lines, drawn. Then our six steps.
The outdoor unit, dimensioned
One circuit for the whole house
Published sound levels, on one scale.
We use the outdoor figure to choose where the unit goes.
Every number, and where it comes from.
Each line carries its source; a line with no published value is not shown.
The manufacturer’s documentation, as PDF.
Everything we have written about this system.
Moving a large house off electric baseboards, in five zones
A good share of the houses in Laval, on the North Shore and on the South Shore were built at a time when every room got its own baseboard and thermostat. No ducts, no central air, and a winter bill that grows with the square footage. This five-zone 60,000 BTU multi-zone heat pump is designed for that exact project: converting most of a large house to a heat pump, one main room at a time, with a single KM60X6O outdoor unit.
We also recommend it for large homes in Montréal and Longueuil heated with electric baseboards: an expanded bungalow with a finished basement, a two-storey house with four bedrooms, a three-level townhouse.
The baseboards stay, but they work a lot less
The first thing to understand is the role the baseboards keep. This unit is ENERGY STAR certified, but it does not carry the ENERGY STAR cold climate designation, unlike the lower-capacity units in the same series. We point this out right from the start, because some sales materials attribute this designation to the whole range, while this model's certificates don't give it that designation. The values listed on NEEP, with wall-mounted heads (AHRI No. 218389037), show how capacity changes as it gets colder:
- At -8.3 °C: 41,000 BTU/h, with a COP of 2.58, or about 68% of nominal capacity.
- At -15 °C: 36,400 BTU/h, with a COP of 1.9, or about 61%.
- At -30 °C: 20,000 BTU/h, with a COP of 1.25, or about 33%, at the heating operating limit.
For a conversion, here's how to read this. For most of the heating season, the heat pump heats the five rooms it serves on its own, and every kilowatt-hour it uses at -8.3 °C produces about two and a half times more heat than a kilowatt-hour in a baseboard. In extreme cold, its capacity drops significantly: the baseboards then make up the difference, room by room. Even at -30 °C, a COP of 1.25 is still better than a baseboard, which turns one kilowatt-hour of electricity into one kilowatt-hour of heat, and no more.
In practice, we set the baseboard thermostats a few degrees below the heat pump's set point. They only come on when the head in that room can no longer keep up, without you having to do anything. No baseboards are removed: they remain your backup heat and your safety net during maintenance.
When another unit would make more sense
If your main goal is to lower your heating bill, we always compare this system with the KM42X6O and KM48X6O units in the same range. They also accept five zones, carry the ENERGY STAR cold climate designation and have a higher indicative LogisVert amount, calculated at $120 per 1,000 BTU/h instead of $50. The KM60X6O makes sense when the house's cooling load exceeds what those units deliver, or when one of the rooms needs a 30,000 or 36,000 BTU head, sizes reserved for this outdoor unit. We present the comparison to you, with ENERGY STAR and NEEP figures to back it up, before any quote.
Five zones, a layout planned room by room
A house heated with baseboards is already divided into zones: one baseboard, one thermostat, one room. The conversion doesn't copy that layout exactly. The five heads cover the living spaces, and the small closed rooms, such as the bathroom, entryway and laundry room, simply keep their baseboard.
The compatible CHARMO wall-mounted heads are the KW09XQ19CDI, KW12XQ19CDI, KW18XQ19CDI, KW24XQ19CDI, KW30XQ21CDI and KW36XQ21CDI, from 9,000 to 36,000 BTU. In a large bungalow with a finished basement, the most common layout looks like this:
- an 18,000 BTU head for the living and dining room, the open-plan area with the most glass;
- a 12,000 BTU head for the finished basement, where the foundation walls cool the room all winter;
- a 12,000 BTU head for the primary bedroom;
- a 9,000 BTU head for a secondary bedroom;
- a 9,000 BTU head for the home office or the third bedroom.
The total reaches the outdoor unit's 60,000 BTU. The on-site assessment of heating needs, room by room, fine-tunes these capacities to your house. A head that's too big in a bedroom keeps starting and stopping and removes humidity poorly in summer; a head that's too small in the open-plan area leaves the baseboards working all winter. Two small neighbouring bedrooms can also share a head, with the doors open, when their load is low.
Wi-Fi is included: all five zones can be programmed from the KINGHOME PLUS app or by voice with Google Assistant and Amazon Alexa. They always run in the same mode, heating or cooling.
Cooling, on top of heating
A house heated with baseboards has often never had any cooling other than a few window units. With a SEER2 of 21 and an EER2 of 11.65, R-32 refrigerant, a twin rotary compressor and an electronic expansion valve, the conversion adds cooling and dehumidification in all five rooms, without opening up the ceilings to run ducts. The HSPF2 of 10, for its part, measures seasonal heating efficiency.
What we check before installation
Electrical service capacity
This is the point that needs the most attention in a conversion. The outdoor unit requires a 220 V supply, an MCA of 38 A and an MOP of 40 A, the highest demand in the series. The five heads are powered through the interconnect cable, with no breaker of their own. Since the baseboards stay in place, the heat pump adds to the existing load instead of replacing it. So we do a load calculation for the entire service entrance: baseboards, water heater, range, dryer, and any EV charger or pool heat pump already connected. We also check for free space in the panel for a double-pole breaker. If the service is already close to its limit, we tell you before the quote, along with the possible options, including a service upgrade by a master electrician.
Outdoor unit location
The unit measures 35.43 x 13.39 x 49.61 inches, a vertical format with a small footprint, and produces 60 dB(A). We set it on a raised pad or a stand suited to its weight, above snow level, with enough clearance for defrost water to drain. On a single-storey house, we avoid spots under a roof slope where snow slides off, as well as areas close to bedroom windows.
Five pairs of lines
Each head has its own pair of lines, 1/4 and 1/2 inch depending on the port. In a bungalow, the bedroom lines often run through the attic and the basement lines through the rim joist, which limits line covers on the façade. Each circuit is insulated along its entire length, pressure-tested and vacuumed separately.
Five drains
Each head has its own condensate drain, with a steady slope toward the outside or toward a floor drain in the basement. For a head on an interior wall, a condensate pump is planned and included in the quote.
LogisVert grant
This system has an indicative LogisVert amount of $2,050, calculated according to the LogisVert rule ($50 per 1,000 BTU/h of certified heating at -8.3 °C, the rate for a unit without the cold climate designation); eligibility is confirmed on the installation date. Only Hydro-Québec confirms the assistance granted. The references are AHRI 218389037 and ENERGY STAR ID 4610343, established with wall-mounted heads.
Why choose AirGreen
- Salaried refrigeration technicians experienced in converting baseboard-heated houses.
- Civil liability insurance of $5,000,000.
- Warranty registration done for you.
- After-sales service that knows your installation.
Request your free estimate: we assess the heating needs of your five rooms on site, check your electrical service and give you an honest comparison between this model and the certified cold-climate units.
Warranty: 12 years on the compressor, 12 years on parts and 6 years on labour, directly from the distributor, on registered models.
What people ask us about multi-zone systems.
Can I heat one room and cool another at the same time?
No. On a multi-zone system like this one, every head works in the same mode, heating or cooling. Each room still keeps its own set temperature.
What happens when every room calls for heat?
They share the outdoor unit’s capacity: 41,000 BTU/h at −8 °C, 36,400 at −15 °C and 20,000 at −30 °C.
How many heads can I connect?
Up to 6 on this outdoor unit. This product is configured for 5 heads.
How much is the LogisVert grant?
$2,050. The grant never exceeds 100 % of the cost before taxes; apply within 9 months of installation.
Is it ENERGY STAR certified?
Yes, ID 4610343.
Down to what temperature does it heat?
Down to −30 °C. At −30 °C, it still delivers 20,000 BTU/h with a COP of 1.25.
Is it noisy?
Indoors, the reference head goes down to 26 dB(A). Outdoors, 60 dB(A): we place the unit away from bedroom windows.
Why a multi-zone instead of several wall units?
One outdoor unit on the wall and one circuit. In return, the rooms share the capacity, and if the outdoor unit stops, every zone stops.
What does the warranty cover?
Our sheet lists 12 years on the compressor and 12 years on parts. AirGreen extended warranty: possible.
A multi-zone system is planned room by room. At your home.
We measure every room, draw the line route and choose the right head for each zone. The on-site estimate is free and the quote arrives within 24 h.
