KINGHOME Ultra Heat R32 3-Zone Heat Pump | 36,000 BTU | Montréal, Laval, South Shore, North Shore
The Kinghome Ultra Heat 3 zones 36 000 multi-zone heat pump heats and cools 3 rooms with a single outdoor unit. ENERGY STAR cold-climate certified, it delivers 36,000 BTU/h at −8 °C, heats down to −30 °C and has an indicative LogisVert amount of $4,320 (only Hydro-Québec confirms the assistance granted). Installed by AirGreen in Montréal, Laval, Longueuil, the North Shore and the South Shore.
3 rooms, one outdoor unit.
Figures come from the manufacturer’s data and the AHRI certification.
The parts that make a multi-zone system.
Tap a part to learn more.
Outdoor unit
One compressor for the whole house. It supplies up to 4 heads.
Base pan heater
A heater keeps the outdoor unit’s base pan free of ice below 1 °C and during defrost (NEEP).
Refrigerant lines
One pair of lines per head.
Indoor heads
One head per room, each with its own remote and temperature. The combination is chosen in the “Zones” menu.
Control
Each zone is set separately, also from your phone.
Turn rooms on and off. Watch the power being shared.
One outdoor unit supplies every head: when several rooms call at once, they share its capacity. Pick an outdoor temperature.
Tell us your rooms. We tell you if this size is enough.
Pick the number of rooms and their size. The estimate targets a −15 °C day; it is a guide, the real calculation is done room by room at your home.
The whole series at a glance: find the box that fits you.
Each box is a product: the outdoor unit’s size, and the number of heads.
At −15 °C, it still delivers 100 % of its rated capacity.
Tap a temperature: capacity, efficiency and the cost of one hour of heating.
At every temperature, cheaper than baseboards.
Cost of one hour at full output, for the same heat delivered. Hydro-Québec Rate D, second tier: 11.142 ¢/kWh.
The official ratings, on the same scales as before.
SEER2, HSPF2 and EER2 come from the AHRI certification.
A grant you can calculate, not guess.
The capacity at −8 °C. $120 per 1,000 BTU/h is the rate for ENERGY STAR cold-climate heat pumps (guide v1.10).
One multi-zone or several wall units? Both sides, honestly.
We compare both options on your floor plan during the estimate.
What to know before installing a multi-zone system.
Dimensions, wiring and lines, drawn. Then our six steps.
The outdoor unit, dimensioned
One circuit for the whole house
Published sound levels, on one scale.
We use the outdoor figure to choose where the unit goes.
Every number, and where it comes from.
Each line carries its source; a line with no published value is not shown.
The manufacturer’s documentation, as PDF.
Everything we have written about this system.
Three levels, three zones, a house that needs real heating
Older houses in Montréal and in the first-ring suburbs of Laval and Longueuil often have three clearly separate levels: a main living floor, an upper floor of bedrooms and a basement finished over the years. The original insulation is modest, the windows have been replaced once, and heating relies on baseboards or an old electric furnace. In this kind of house, a heat pump isn't just there to cool in summer: it's expected to carry a real share of the winter heating. This KINGHOME Ultra Heat R32 36,000 BTU three-zone multi-zone heat pump puts one head on each level, with the reserve capacity that a house losing heat calls for.
We also recommend it for corner houses and more isolated properties on the North Shore and South Shore, which are more exposed to wind than attached houses.
One head per level
The KM36X6O outdoor unit accepts the CHARMO multi-zone wall-mounted heads KW09XQ19CDI (9,000 BTU), KW12XQ19CDI (12,000 BTU), KW18XQ19CDI (18,000 BTU) and KW24XQ19CDI (24,000 BTU). For a three-level house, the layout we choose most often is the following:
- Ground floor: an 18,000 or 24,000 BTU head, depending on how open the living area is and how much glazing it has.
- Upper floor: a 12,000 BTU head on the landing or in the primary bedroom, where summer heat builds up.
- Basement: a 9,000 or 12,000 BTU head, which heats in winter and dehumidifies in summer.
With a 24,000 BTU head on the ground floor, 12,000 BTU upstairs and 9,000 BTU in the basement, the total comes to 45,000 BTU. Going over the nominal capacity like this is common in multi-zone systems, because the three levels don't call for their maximum at the same time. The variable-speed compressor and the electronic expansion valve distribute refrigerant according to each head's demand.
Capacity that doesn't drop before -15 °C
In a house that loses heat, what matters is the capacity delivered in deep cold. The values listed on NEEP for this combination with wall-mounted heads (AHRI No. 215708444):
- 36,000 BTU/h at -8.3 °C, COP of 2.3.
- 36,000 BTU/h at -15 °C, COP of 2.1: the full nominal capacity is still available.
- 26,200 BTU/h at -30 °C, COP of 1.51, or nearly 73% of nominal capacity, at the heating operating limit.
That's why we steer more energy-hungry houses toward this model rather than a lower-capacity three-zone unit: the difference doesn't show in October, it shows during the first week at -15 °C. The heat pump then remains the main heating source, and the electric furnace or baseboards only kick in as backup. The unit carries the ENERGY STAR cold climate designation.
The basement, often the most cost-effective zone
In an older house, the basement is cold in winter and damp in summer. Heat from the ground floor never makes it down there. A dedicated head makes it livable year-round, protects the finishes and cuts down on the use of a portable dehumidifier. We mount it high on a wall, away from the joists and existing duct bulkheads, so the airflow covers the whole room.
Efficiency and features
The system is certified at 21 SEER2, 10 HSPF2 and 12 EER2. Each head offers automatic vertical and horizontal louvres, 3D airflow, humidity control, Turbo mode, self-cleaning and R-32 refrigerant leak detection. Wi-Fi is included: the three levels are adjusted separately in the KINGHOME PLUS app or by voice command. The outdoor unit is equipped with a heater in the base pan for defrost water, smart defrost and MAX Guard anti-corrosion protection.
What we check before installation
An older house often holds surprises. Here are the points we confirm during an assessment in Montréal, Laval, Longueuil, on the North Shore or the South Shore.
The electrical service
The system requires a 220 V supply, a 30 A MCA and a 45 A MOP. The three heads are powered by the outdoor unit. In an older house, this is the first thing we check: service capacity, panel condition, available space and the load of the baseboards and furnace already connected. If an upgrade is needed, we say so in the quote, not after the work is done.
Outdoor unit location
The unit measures 40.16 x 16.81 x 32.52 inches and its sound level is rated at 63 dB(A). On a street where houses are close together, we place it away from bedroom windows, yours as well as the neighbours'. It is mounted on a wall bracket above the snow line, sheltered from snow sliding off the roof, with free drainage for defrost water.
Three levels of line sets
Each head is connected by its own pair of 1/4 and 3/8 inch lines. The upper-floor line is the longest and the highest; the basement line goes through the foundation or the rim joist. We check the height difference between the outdoor unit and each head, group the lines in a line-set cover, and pull a vacuum and run a leak test on every circuit.
Drains
The ground-floor and upper-floor heads usually drain outside by gravity. In the basement, we install a condensate pump connected to an existing drain.
Certification and LogisVert assistance
Reference numbers: AHRI 215708444 and ENERGY STAR ID 3798994. This combination has an indicative LogisVert amount of $4,320, calculated with the LogisVert rule ($120 per 1,000 BTU/h of certified heating capacity at -8.3 °C); eligibility is confirmed on the installation date. Only Hydro-Québec confirms the assistance granted.
Why go with AirGreen
- Salaried refrigeration technicians used to older houses and their quirks.
- $5,000,000 in civil liability insurance.
- Warranty registration handled by us at commissioning.
- After-sales service that knows all three of your levels.
Request your free estimate: we assess each level, check your electrical service and give you a clear quote for the whole house.
Warranty: 12 years on the compressor, 12 years on parts and 6 years on labour, directly from the distributor, on registered units.
What people ask us about multi-zone systems.
Can I heat one room and cool another at the same time?
No. On a multi-zone system like this one, every head works in the same mode, heating or cooling. Each room still keeps its own set temperature.
What happens when every room calls for heat?
They share the outdoor unit’s capacity: 36,000 BTU/h at −8 °C, 36,000 at −15 °C and 26,200 at −30 °C.
How many heads can I connect?
Up to 4 on this outdoor unit. This product is configured for 3 heads.
How much is the LogisVert grant?
$4,320. The grant never exceeds 100 % of the cost before taxes; apply within 9 months of installation.
Is it ENERGY STAR certified?
Yes, cold climate, ID 3798994.
Down to what temperature does it heat?
Down to −30 °C. At −30 °C, it still delivers 26,200 BTU/h with a COP of 1.51.
Is it noisy?
Indoors, the reference head goes down to 26 dB(A). Outdoors, 63 dB(A): we place the unit away from bedroom windows.
Why a multi-zone instead of several wall units?
One outdoor unit on the wall and one circuit. In return, the rooms share the capacity, and if the outdoor unit stops, every zone stops.
What does the warranty cover?
Our sheet lists 12 years on the compressor and 12 years on parts. AirGreen extended warranty: possible.
A multi-zone system is planned room by room. At your home.
We measure every room, draw the line route and choose the right head for each zone. The on-site estimate is free and the quote arrives within 24 h.
