KINGHOME Ultra Heat R32 3-Zone Heat Pump | 42,000 BTU | Montréal, Laval, South Shore, North Shore
The Kinghome Ultra Heat 3 zones 42 000 multi-zone heat pump heats and cools 3 rooms with a single outdoor unit. ENERGY STAR cold-climate certified, it delivers 44,500 BTU/h at −8 °C, heats down to −30 °C and has an indicative LogisVert amount of $5,340 (only Hydro-Québec confirms the assistance granted). Installed by AirGreen in Montréal, Laval, Longueuil, the North Shore and the South Shore.
3 rooms, one outdoor unit.
Figures come from the manufacturer’s data and the AHRI certification.
The parts that make a multi-zone system.
Tap a part to learn more.
Outdoor unit
One compressor for the whole house. It supplies up to 5 heads.
Base pan heater
A heater keeps the outdoor unit’s base pan free of ice below 1 °C and during defrost (NEEP).
Refrigerant lines
One pair of lines per head.
Indoor heads
One head per room, each with its own remote and temperature. The combination is chosen in the “Zones” menu.
Control
Each zone is set separately, also from your phone.
Turn rooms on and off. Watch the power being shared.
One outdoor unit supplies every head: when several rooms call at once, they share its capacity. Pick an outdoor temperature.
Tell us your rooms. We tell you if this size is enough.
Pick the number of rooms and their size. The estimate targets a −15 °C day; it is a guide, the real calculation is done room by room at your home.
The whole series at a glance: find the box that fits you.
Each box is a product: the outdoor unit’s size, and the number of heads.
At −15 °C, it still delivers 90 % of its rated capacity.
Tap a temperature: capacity, efficiency and the cost of one hour of heating.
At every temperature, cheaper than baseboards.
Cost of one hour at full output, for the same heat delivered. Hydro-Québec Rate D, second tier: 11.142 ¢/kWh.
The official ratings, on the same scales as before.
SEER2, HSPF2 and EER2 come from the AHRI certification.
A grant you can calculate, not guess.
The capacity at −8 °C. $120 per 1,000 BTU/h is the rate for ENERGY STAR cold-climate heat pumps (guide v1.10).
One multi-zone or several wall units? Both sides, honestly.
We compare both options on your floor plan during the estimate.
What to know before installing a multi-zone system.
Dimensions, wiring and lines, drawn. Then our six steps.
The outdoor unit, dimensioned
One circuit for the whole house
Published sound levels, on one scale.
We use the outdoor figure to choose where the unit goes.
Every number, and where it comes from.
Each line carries its source; a line with no published value is not shown.
The manufacturer’s documentation, as PDF.
Everything we have written about this system.
The baseboard-heated bungalow, rethought in three zones
The single-storey bungalow is the most common house in the suburbs of Laval, Longueuil, the North Shore and the South Shore. Most were built with electric baseboards in every room and no ducts, and many owners end up in the same situation: a high winter bill, no air conditioning except a window unit, and bedrooms that are never the same temperature as the living room. This 42,000 BTU three-zone multi-zone heat pump is the setup we recommend most often for this type of house when it's a good size or the basement is finished.
The layout is logical: one zone for the living area, meaning the living room, kitchen and dining room, and two zones for the bedrooms, or for the bedroom hallway and the finished basement. A single outdoor unit, the KM42X6O, supplies all three CHARMO wall-mounted heads, and each one keeps its own set point and remote.
Replacing the baseboards or keeping them as backup
We don't recommend tearing out the baseboards. They cost nothing to leave in place, they provide backup heat on the coldest nights and they serve as emergency heat if the outdoor unit needs servicing. What changes is their role: instead of the main heat source, they become backup heat that only kicks in when the heat pump can no longer hold the set point.
The difference shows up in the coefficient of performance. An electric baseboard delivers one unit of heat for one unit of electricity. At -15 °C, this heat pump delivers 2.1 units of heat for every unit it uses, which means it needs less than half the electricity of a baseboard for the same heat. At -8.3 °C, a much more common temperature in the Montréal area, the COP listed on NEEP is 2.4.
Placing the heads in a single-storey house
The heads compatible with this outdoor unit are the KW09XQ19CDI (9,000 BTU), the KW12XQ19CDI (12,000 BTU), the KW18XQ19CDI (18,000 BTU) and the KW24XQ19CDI (24,000 BTU). In a bungalow, the typical combination is an 18,000 BTU head for the living area and two 12,000 BTU heads for the bedrooms or the basement, which adds up to the outdoor unit's 42,000 BTU.
Where the living-area head goes is the most important decision. Mounted on the wall facing the bedroom hallway, it pushes air toward the back of the house, and the bedrooms get some of that heat with the doors open. Mounted in a corner of the kitchen, it mostly heats the cabinets. We draw up this plan with you during the visit.
What the unit delivers in extreme cold
- At -8.3 °C: 44,500 BTU/h, COP of 2.4.
- At -15 °C: 37,800 BTU/h, COP of 2.1.
- At -30 °C: 28,400 BTU/h, COP of 1.5, the heating operating limit.
These values are listed on NEEP (AHRI No. 215708445) for a fully ductless configuration, like this one. The unit carries the ENERGY STAR cold climate designation. For an averagely insulated bungalow, these capacities cover the vast majority of the year's heating hours. The baseboards only take over during extreme cold spells, a few days each winter.
A more even house from one room to the next
Baseboards heat by convection, along the exterior walls, and each thermostat works on its own. The result is familiar: one bedroom too warm, another too cool, a living room where the air stays stratified between the cold floor and the warm ceiling. The wall-mounted heads circulate the air in each zone continuously, at low speed, and the variable-speed compressor modulates to match actual demand instead of starting and stopping. That's mostly what owners tell us about after the first winter: smaller differences between rooms, less of a cold draft near the windows and heat that no longer collects along the walls.
Summer, without a unit in the window
With a SEER2 of 21 and an EER2 of 13, the system cools all three zones while using noticeably less than a set of window units, with no compressor noise in the bedroom. Wi-Fi is included, and all three heads can be controlled from the KINGHOME PLUS app or by voice with Google Assistant and Amazon Alexa. The HSPF2 of 10 sums up efficiency over the whole heating season.
What we check before installing three zones
The electrical service
Many bungalows still have their original electrical service, already loaded by the baseboards, the range, the dryer and the water heater. The outdoor unit requires a 220 V supply, an MCA of 30 A and an MOP of 45 A, on a single circuit: all three heads are powered through the interconnect cable. We do a load calculation on the electrical panel before the quote and tell you clearly whether any adjustment is needed.
Outdoor location
The unit measures 40.16 x 16.81 x 32.52 inches and produces 63 dB(A). On a bungalow, we usually place it on the side or at the back, on a wall bracket or a raised pad above the snow, away from the edge of the roof where snow and ice slide off in spring. Defrost water has to be able to drain without freezing on a walkway or a front step.
Running the lines
Each head has its own pair of 1/4 and 3/8 inch lines. In a single-storey house, we run them either through the crawl space or the basement, or under line covers along the exterior siding. Lines that run through the attic are insulated along their full length to prevent condensation in summer and heat loss in winter.
Condensate drains
Three heads, three drains. On an exterior wall, gravity drainage is the most reliable solution. For a head mounted on an interior wall, we plan either a drain tied into the plumbing or a quiet condensate pump, and we note it in the quote.
LogisVert assistance
This system has an indicative LogisVert amount of $5,340, calculated according to the LogisVert rule ($120 per 1,000 BTU/h of certified heating capacity at -8.3 °C); eligibility is confirmed on the installation date. Only Hydro-Québec confirms the assistance granted. The system references are AHRI 215708445 and ENERGY STAR ID 3798995.
Why go with AirGreen
- Salaried refrigeration technicians, trained on multi-zone systems.
- Civil liability insurance of $5,000,000.
- Your warranty registration done by our team.
- After-sales service that keeps the history of your installation.
Request your free estimate: we assess your bungalow room by room, check the panel and suggest a three-zone layout suited to your house.
Warranty: 12 years on the compressor, 12 years on parts and 6 years on labour, directly from the distributor, on registered models.
What people ask us about multi-zone systems.
Can I heat one room and cool another at the same time?
No. On a multi-zone system like this one, every head works in the same mode, heating or cooling. Each room still keeps its own set temperature.
What happens when every room calls for heat?
They share the outdoor unit’s capacity: 44,500 BTU/h at −8 °C, 37,800 at −15 °C and 28,400 at −30 °C.
How many heads can I connect?
Up to 5 on this outdoor unit. This product is configured for 3 heads.
How much is the LogisVert grant?
$5,340. The grant never exceeds 100 % of the cost before taxes; apply within 9 months of installation.
Is it ENERGY STAR certified?
Yes, cold climate, ID 3798995.
Down to what temperature does it heat?
Down to −30 °C. At −30 °C, it still delivers 28,400 BTU/h with a COP of 1.5.
Is it noisy?
Indoors, the reference head goes down to 26 dB(A). Outdoors, 63 dB(A): we place the unit away from bedroom windows.
Why a multi-zone instead of several wall units?
One outdoor unit on the wall and one circuit. In return, the rooms share the capacity, and if the outdoor unit stops, every zone stops.
What does the warranty cover?
Our sheet lists 12 years on the compressor and 12 years on parts. AirGreen extended warranty: possible.
A multi-zone system is planned room by room. At your home.
We measure every room, draw the line route and choose the right head for each zone. The on-site estimate is free and the quote arrives within 24 h.
