KINGHOME Ultra Heat R32 4-Zone Heat Pump | 36,000 BTU | Montréal, Laval, South Shore, North Shore
The Kinghome Ultra Heat 4 zones 36 000 multi-zone heat pump heats and cools 4 rooms with a single outdoor unit. ENERGY STAR cold-climate certified, it delivers 36,000 BTU/h at −8 °C, heats down to −30 °C and has an indicative LogisVert amount of $4,320 (only Hydro-Québec confirms the assistance granted). Installed by AirGreen in Montréal, Laval, Longueuil, the North Shore and the South Shore.
4 rooms, one outdoor unit.
Figures come from the manufacturer’s data and the AHRI certification.
The parts that make a multi-zone system.
Tap a part to learn more.
Outdoor unit
One compressor for the whole house. It supplies up to 4 heads.
Base pan heater
A heater keeps the outdoor unit’s base pan free of ice below 1 °C and during defrost (NEEP).
Refrigerant lines
One pair of lines per head.
Indoor heads
One head per room, each with its own remote and temperature. The combination is chosen in the “Zones” menu.
Control
Each zone is set separately, also from your phone.
Turn rooms on and off. Watch the power being shared.
One outdoor unit supplies every head: when several rooms call at once, they share its capacity. Pick an outdoor temperature.
Tell us your rooms. We tell you if this size is enough.
Pick the number of rooms and their size. The estimate targets a −15 °C day; it is a guide, the real calculation is done room by room at your home.
The whole series at a glance: find the box that fits you.
Each box is a product: the outdoor unit’s size, and the number of heads.
At −15 °C, it still delivers 100 % of its rated capacity.
Tap a temperature: capacity, efficiency and the cost of one hour of heating.
At every temperature, cheaper than baseboards.
Cost of one hour at full output, for the same heat delivered. Hydro-Québec Rate D, second tier: 11.142 ¢/kWh.
The official ratings, on the same scales as before.
SEER2, HSPF2 and EER2 come from the AHRI certification.
A grant you can calculate, not guess.
The capacity at −8 °C. $120 per 1,000 BTU/h is the rate for ENERGY STAR cold-climate heat pumps (guide v1.10).
One multi-zone or several wall units? Both sides, honestly.
We compare both options on your floor plan during the estimate.
What to know before installing a multi-zone system.
Dimensions, wiring and lines, drawn. Then our six steps.
The outdoor unit, dimensioned
One circuit for the whole house
Published sound levels, on one scale.
We use the outdoor figure to choose where the unit goes.
Every number, and where it comes from.
Each line carries its source; a line with no published value is not shown.
The manufacturer’s documentation, as PDF.
Everything we have written about this system.
A complete zoning plan for a single-family house
When a homeowner asks us to do the whole house without installing ductwork, the project changes scale. It's no longer about adding comfort to one difficult room, but about building a complete plan: which room gets a head, what size, and how a single outdoor unit shares its capacity among all those spaces. This 36,000 BTU, four-zone KINGHOME Ultra Heat R32 multi-zone heat pump is the tool for that kind of project: four wall-mounted heads, one of which can be a large one, connected to an outdoor unit that keeps its full nominal capacity down to -15 °C.
We install it in single-family houses in Laval, on the North Shore and on the South Shore that combine an open area, closed bedrooms and a finished basement, and in large houses in Montréal where the owner wants to replace both the baseboards and the window air conditioners.
Building the capacity budget
The KM36X6O outdoor unit accepts the CHARMO multi-zone wall-mounted heads KW09XQ19CDI (9,000 BTU), KW12XQ19CDI (12,000 BTU), KW18XQ19CDI (18,000 BTU) and KW24XQ19CDI (24,000 BTU). With four zones, the choice of each head comes from an on-site assessment of heating needs, room by room, not from a general rule. A common example:
- Open area on the main floor: an 18,000 BTU head.
- Main bedroom: a 12,000 BTU head.
- Second bedroom: a 9,000 BTU head.
- Finished basement: a 9,000 BTU head.
The total, 48,000 BTU, is higher than the outdoor unit's nominal capacity of 36,000 BTU. That's how a well-designed multi-zone system works: the four zones never all call for their maximum at the same time. At night, the open area and the basement run at low speed while the bedrooms are active; during the day, it's the reverse. The variable-speed compressor and the electronic expansion valve adjust the refrigerant flow to each head's actual demand.
Four zones is this unit's maximum
The KM36X6O can serve four zones at most. In this version, every connection is used: there won't be a fifth head added later on the same unit. So the plan has to be right from the start. During our visit, we go over every room with you, including the ones that won't get a head and how they'll be served, through an open door to a neighbouring zone or by the baseboard that stays in place.
Cold-weather performance that lets you heat the whole house
For a heat pump that serves an entire house, the key number is the capacity delivered in the dead of winter. According to the values listed on NEEP (AHRI No. 215708444) for this combination with wall-mounted heads:
- At -8.3 °C: 36,000 BTU/h, with a COP of 2.3.
- At -15 °C: 36,000 BTU/h, with a COP of 2.1, or 100% of the nominal capacity.
- At -30 °C: 26,200 BTU/h, with a COP of 1.51, at the heating operating limit.
A COP of 2.1 at -15 °C means the house gets a little more than twice the heat for every kilowatt-hour used, compared with baseboards. Over a full winter, that's where most of the savings come from. The baseboards stay in place as backup, room by room, for the coldest hours. The unit carries the ENERGY STAR cold climate designation and is rated at 21 SEER2, 10 HSPF2 and 12 EER2.
A whole house controlled from your phone
Wi-Fi is included. All four zones show up in the KINGHOME PLUS app: you can schedule each one according to how it's used, shut off the basement when no one's down there and get the house ready before you come back from a trip. Each head keeps its own remote, and voice control works with Google Assistant and Amazon Alexa. Automatic vertical and horizontal louvres, 3D airflow, humidity control, self-cleaning and R-32 refrigerant leak detection come on every head.
What we check before the installation
A four-zone system on a 36,000 BTU unit is a primary heating project. Here's what we confirm during an assessment in Montréal, Laval, Longueuil, on the North Shore or the South Shore.
The electrical supply
The unit requires 220 V, an MCA of 30 A and an MOP of 45 A. All four heads are powered by the outdoor unit. We review the electrical service and the panel, taking into account the baseboards, the water heater and the appliances already connected. One circuit for four zones is still much simpler than four separate units, but that circuit has to be planned properly.
Where the outdoor unit goes
The unit measures 40.16 x 16.81 x 32.52 inches and its sound level is rated at 63 dB(A). For a unit that runs much of the winter, we choose a wall away from the bedrooms and from the neighbour's property line, and a spot where the four sets of lines come together without crossing the whole exterior wall. Wall bracket anchored into the structure, above the snow, out of the way of snow falling off the roof.
Four piping circuits
Each head is connected by its own pair of 1/4 and 3/8 inch lines. We label each line at the outdoor unit, group the routes through the basement or in a shared line cover, insulate each line along its entire length, and do the vacuum and leak test on all four circuits. At start-up, we test each zone separately to confirm that each connection serves the right room.
Four drains
Each head has its own drain, with a continuous slope to the outside. For the basement head and for any head on an interior wall, we install a condensate pump connected to a standpipe.
Certification and LogisVert assistance
Reference numbers: AHRI 215708444 and ENERGY STAR ID 3798994. The indicative LogisVert amount for this combination is $4,320, calculated using the LogisVert rule ($120 per 1,000 BTU/h of certified heating capacity at -8.3 °C); eligibility is confirmed on the installation date. Only Hydro-Québec confirms the assistance granted.
Why go with AirGreen
- Salaried refrigeration technicians who draw up the zoning plan before quoting a price.
- Civil liability insurance of $5,000,000.
- Warranty registration done by our team.
- After-sales service that keeps your four-zone configuration on file.
Ask for your free estimate: we draw up the zoning plan for your house, check your electrical service and give you a complete quote.
Warranty: 12 years on the compressor, 12 years on parts and 6 years on labour, directly from the distributor, on registered models.
What people ask us about multi-zone systems.
Can I heat one room and cool another at the same time?
No. On a multi-zone system like this one, every head works in the same mode, heating or cooling. Each room still keeps its own set temperature.
What happens when every room calls for heat?
They share the outdoor unit’s capacity: 36,000 BTU/h at −8 °C, 36,000 at −15 °C and 26,200 at −30 °C.
How many heads can I connect?
Up to 4 on this outdoor unit. This product is configured for 4 heads.
How much is the LogisVert grant?
$4,320. The grant never exceeds 100 % of the cost before taxes; apply within 9 months of installation.
Is it ENERGY STAR certified?
Yes, cold climate, ID 3798994.
Down to what temperature does it heat?
Down to −30 °C. At −30 °C, it still delivers 26,200 BTU/h with a COP of 1.51.
Is it noisy?
Indoors, the reference head goes down to 26 dB(A). Outdoors, 63 dB(A): we place the unit away from bedroom windows.
Why a multi-zone instead of several wall units?
One outdoor unit on the wall and one circuit. In return, the rooms share the capacity, and if the outdoor unit stops, every zone stops.
What does the warranty cover?
Our sheet lists 12 years on the compressor and 12 years on parts. AirGreen extended warranty: possible.
A multi-zone system is planned room by room. At your home.
We measure every room, draw the line route and choose the right head for each zone. The on-site estimate is free and the quote arrives within 24 h.
