Home » Gree Parts & Accessories
AirGreenGREE
GREE EliteThe GREE space at AirGreen · Parts and accessoriesGREE Elite dealer: GREE training completed, priority access to original parts.
GREE Elite
Original GREE parts
GREE · parts and accessories · Updated Oct. 27, 2026

GREE parts and accessories. A grille, a heat kit, a harness. The right part starts from the model number, and GREE sets its limits.

9 GREE items on this page: cassette grilles, FLEXX heat kits, wall controls, a harness and a terminal block. Each one fits specific units. A TF06 grille does not fit a 12,000 cassette; a 20 kW kit does not go into a 2-ton air handler. The tool below starts from your unit and gives the part GREE lists for it.

Find my partWhat documents each partBook my free estimate
26 ftHarness 40010232: 26 ft with Molex plugs, per GREE Comfort. GREE forbids cutting or splicing a wall-control harness.
L1 / L2GREE bulletin TB-FLX-11102022: when a heat kit goes into an R410A FLEXX air handler, line voltage must come off terminals L1 and L2 of the terminal block for good.
100 AThe rating of the 4-pole FLEXXSPCKIT jumper bar (10-11689-00) GREE lists for the 15 and 20 kW R410A FLEXX heat kits.
  • 9parts and accessories on this page
  • 3families of FLEXX heat kits, each documented for its own air handlers
  • 620 · 950mm square: TF05 and TF06 grilles
  • 7parts on this page documented by GREE or a distributor
AirGreen × GREEGREE Elite dealerOriginal GREE partsThe part, from the model numberGrilles · FLEXX heat kits · harnessesMontréal, Laval, Longueuil, South Shore, North Shore
The part for your unit

Start from the unit. The part follows.

Nine unit families, and for each one what GREE, GREE Canada or a Canadian distributor allows: the grille, the heat-kit ratings allowed per air handler, the harness. US families are marked; we do not mix them with Canadian ones.

Which GREE part for my unit?

Pick the unit as written on its nameplate. The answer comes from a specific document, and each one repeats the same rule: we confirm the fit with the full model number before ordering.

What documents each part

Nine items, a status for each.

An original part is ordered on the strength of a document. Here, for each item on this page, is the one we found, or the lack of one where that is the case.

ItemStatusWhat we found
TF05 grille8-way cassette
Document found
GREE Canada, brochure 062025: 9,000, 12,000 and 18,000; 620 × 620 × 48 mm.
TF06 grille8-way cassette
Document found
Same brochure: 24,000, 30,000 and 36,000; 950 × 950 × 52 mm.
Harness 40010232multi-zone control
Document found
GREE Comfort compatibility guide: 26 ft, Molex plugs.
XK19 control
Document found
GREE Comfort submittal; named by GREE Canada for the Free Match Extreme cassette and slim duct. Per that submittal, the 26 ft cable is included; our listing says “wiring not included”: we confirm what is in the box when ordering.
XK76 control
Document found
GREE Comfort submittal; Dettson drawings X60063D and X60069-2A.
FLEXX R410A heat kitsFLEXXHTR
Document found
GREE Comfort BH air handler submittals; AH air handler manual published by TTI Climatisation.
FLEXX R32 heat kits
Two families
LYQ-08-F, G and H: GREE Comfort manual for the FXU air handlers (FLEXX ULTRA, distributed in Québec by TTI Climatisation). 21-4216-03, 21-4217-01 and 21-4228-01: Dettson manual X40273A, GUD air handlers.
B04537 terminal block
Our sheets only
Presented in our sheets as a terminal block for 12, 15 and 20 kW kits; no GREE, GREE Canada or Dettson document we read names it. For the 15 and 20 kW R410A FLEXX kits, GREE documents the FLEXXSPCKIT jumper bar.
Control 300001060284L9130
Our sheets only
Presented in our sheets as a multi-zone wall control with wiring; no primary document we read gives this number.

“Our sheets only”: data from our product sheets, not confirmed by GREE. Documents read Oct. 26, 2026.

AirGreen × GREE

The right GREE part, wired the right way.

GREE sets which part goes on which unit. AirGreen reads the nameplate, orders the original part and installs it by the document.

GREE

What GREE brings

  • Grilles by sizeTwo grilles cover GREE Canada’s All Match R32 8-way cassettes, from the 9,000 to the 36,000.
  • Heat kits by air handlerFor each FLEXX air handler, a published document sets the heat-kit ratings allowed.
  • Written wiring rulesTechnical bulletin, jumper-bar sheet, harness guide: GREE publishes how to wire.
AirGreen

What AirGreen brings

  • GREE Elite dealerGREE training completed, priority access to original parts.
  • Free estimateWe read your unit’s nameplate and tell you which part GREE lists for it.
  • RBQ 5645-9605-01Licences 15.8, 15.10 and 16. Gas and oil work is done by a licensed partner.

The result: the original part GREE lists for your unit, installed and wired by a GREE Elite dealer.

Find my partBook my free estimate
The GREE shop

All 9 GREE parts and accessories, right below.

Each listing names the part. The tool at the top of the page says which unit it goes on; the status table, which document describes it, or that none does.

GREE
Technician’s corner

Before ordering: the details that change the part.

AH or BH: the end of the number

Two FLEXX R410A air handlers of the same size do not take the same kits. The FLEXX24…BH takes 5, 8 or 10 kW; the FLEXX24…AH, 5 or 8 kW only. The last two letters of the model number decide.

GREE Comfort FLEXX24 BH submittal · AH air handler manual, TTI

One digit apart

The 20 kW R410A kit also carries number 21-4228-00; Dettson’s Canadian R32 20 kW, 21-4228-01. Same for the 15 kW (21-4217-00 and 21-4217-01). We order on the full number, never on the rating alone.

GREE Comfort FLEXX submittals · Dettson X40273A

An R32 air handler shipped without heat

Per Dettson’s manual, its FLEXX R32 air handlers leave the factory without electric heat: the kit is an accessory. We pick it when the air handler is ordered, from the tonnage on its nameplate.

Dettson X40273A, p. 19
Did you know?

Four installation details GREE’s documents spell out.

LogisVert · Hydro-Québec

Parts carry no LogisVert amount.

No grille, kit or harness on the list

Hydro-Québec lists heat pumps by AHRI number; a grille, a harness or a heat kit has none. A FLEXX heat kit does not change a heat pump’s amount either: that amount is calculated on the heat pump’s capacity at −8 °C, as listed by ENERGY STAR. System amounts are on the GREE central heat pumps page.

Questions

Grille, heat kit, cable: what people ask us about GREE parts.

Which grille fits my GREE cassette?
On GREE Canada’s All Match R32 8-way cassettes: the TF05, 620 mm square, for the 9,000, 12,000 and 18,000; the TF06, 950 mm, for the 24,000, 30,000 and 36,000. The GKH number on the cassette’s nameplate decides.
Which heat kit does my FLEXX R410A air handler take?
It depends on the last two letters of the model number. BH air handlers: 5, 8 or 10 kW on the FLEXX24, up to 15 kW on the FLEXX36, 10 to 20 kW on the FLEXX48 and FLEXX60. AH air handlers: 5 or 8 kW on the FLEXX24, up to 10 kW on the FLEXX36, 10 to 20 kW on the two largest.
What does GREE provide for the 15 and 20 kW FLEXX heat kits?
A jumper bar, the FLEXXSPCKIT (10-11689-00), which its data sheet lists as compatible with those two kits. And for the R410A FLEXX heat kits, bulletin TB-FLX-11102022 requires line voltage to come off terminals L1 and L2 of the terminal block: it goes only to the kit’s breakers.
Which heat kit for a FLEXX R32 air handler?
On a GUD air handler (Dettson’s FLEXX R32), Dettson lists the LYQ-08-A, C, D and E (5, 10, 15 and 20 kW) by tonnage, the 20 kW from 4 tons up. The LYQ-08-F, G and H (6, 9 and 12 kW) are documented by GREE Comfort for the FLEXX ULTRA’s FXU air handlers. We match the kit to your air handler’s nameplate.
Can I extend the wall control’s cable?
Not on the XK19 and XK76 sold here: GREE Comfort’s compatibility guide sets its wall controls’ harness at 26 ft and forbids cutting or splicing it. If the control has to go farther, we rethink its location with you; each controller’s cable rule is on the GREE thermostats page.
How long does a part take to arrive?
Neither GREE nor its distributors publish lead times, and we do not promise one in advance. We confirm the part with your model number, then the lead time when the order is placed.
AirGreen

A GREE part to replace? Send us the model number: we find the one GREE lists.

Free estimate at home. Montréal, Laval, Longueuil, South Shore and North Shore.

Contact us514-316-2973
GREE Elite dealerGREE training completed, priority access to original parts.
RBQ 5645-9605-01Licences 15.8, 15.10 and 16.
One document per partGrille, heat kit or harness: the page cites the brochure, submittal or manual that allows it.
Sources

Fits as published in each document; GREE and its distributors publish no lead time or stock. Documents read Oct. 26, 2026; page updated Oct. 27, 2026.