CONFORTO Lowboy KLE-02-G015-H3 Electric Furnace | 15 kW - 240V

In stock

Conforto’s 15 kW Lowboy electric furnace with an ECM motor: a low upflow cabinet and five fan speeds to tailor the airflow.

Model numberKLE-02-G015-H3

15 kW51,216 BTU/h at 240 V
5 speedsEcotech ECM motor 1/2 HP
1,200 CFMHIGH speed at 0.5 in w.c.
240 V · single phaseUpflow onlyECM motor
Ask for a quote

514 316-2973 · sales@airgreen.ca

Quick facts

Model numberKLE-02-G015-H3
ManufacturerConforto
Output15 kW (51,216 BTU/h)
MotorEcotech ECM 1/2 HP, 5 speeds
CircuitMCA 85 A, max. breaker 90 A
Dimensions (W x D x H)21 1/2 x 44 x 34 1/2 in
Shipping weight110 lb (50 kg)

A 15 kW Lowboy with an ECM motor, for airflow tuned to your home

Who it suits: homes with a Lowboy, and people who care about comfort

The Conforto KLE-02-G015-H3 is an electric element furnace in the Lowboy format, installed in upflow, in a cabinet of 21 1/2 x 44 in and 34 1/2 in high. It produces 15 kW, or 51,216 BTU/h at 240 V, with three 5 kW elements in two stages: 10 kW, then 15 kW. It replaces a furnace of the same format in a house whose ducts were laid out for a Lowboy.

What sets it apart is its 1/2 HP Ecotech ECM motor with five speeds. For a family that spends its evenings in a finished basement, or for ductwork with unusual pressure, this motor gives more room to set the total airflow.

Five speeds: what it changes in practice

Conforto publishes a complete airflow table. At 0.5 in of water column, MED-LOW speed gives 600 CFM, MEDIUM 825, MED-HIGH 975 and HIGH 1,200 CFM. At the factory, the heating speed is set to M-LOW. At commissioning, we measure the actual pressure in your ducts and choose the right speed, rather than leaving the default setting.

The QuietComfort function preheats recirculated air at low energy to even out the step from one stage to the next, and ComfortMax modulates the elements to limit short cycles. A 24 VAC output also allows a central humidifier to be connected, useful when dry winter air makes itself felt in Laval as on the South Shore.

Ready for summer and for a heat pump

The furnace accepts an air conditioner or heat pump coil of up to 3 tons, on the supply plenum or the return according to the DIP switch 3 setting. With a heat pump, the elements become the backup and come on during defrost. Sold alone, the furnace is not a heat pump and does not qualify for the LogisVert grant.

On the electrical side, Conforto calls for a 240 V single-phase circuit with an 85 A minimum circuit ampacity, a breaker of no more than 90 A and 4 AWG wire.

Our installation

AirGreen is a family business established in Montreal for more than fifteen years, with RBQ licence 5645-9605-01 for ventilation, refrigeration and electrical work. We serve Montreal, Laval, Longueuil, the North Shore and the South Shore.

  • Free on-site estimate and written quote
  • Upflow installation, duct connection and 240 V circuit
  • Thermostat, humidifier where applicable, and ECM speed setting
  • Commissioning and installation of the supplied 20 x 20 x 1 in disposable filter

For a Lowboy that heats well and moves air just right, ask for your free estimate. Written quote, and financing offered by AirGreen to spread the payments.

01 · What it is for

An ECM Lowboy for well-tuned airflow

The KLE-02-G015-H3 is an upflow Lowboy electric furnace. Its three 5 kW elements heat in two stages, and its 5-speed ECM motor lets the airflow be matched to the ductwork.

  • Replacing a Lowboy furnace in a house whose ducts are laid out for that format
  • Finished basements where airflow needs careful tuning
  • Homes that will add an air conditioner or heat pump of up to 3 tons
  • Projects with a central humidifier connected to the furnace
From 600 to 1,275 CFMPublished airflow from 600 CFM (MED-LOW, 0.5 in w.c.) up to 1,275 CFM (HIGH, 0.2 in w.c.).
QuietComfortThe furnace preheats recirculated air at low energy to even out the step from one stage to the next.
24 VAC outputA connection for accessories such as a central humidifier.
02 · Specifications

Specifications

From the manufacturer’s documentation. A value the manufacturer does not publish is not listed.

ManufacturerConforto
TypeElectric element furnace, upflow Lowboy
Output (240 V)15 kW
Output in BTU/h (240 V)51,216 BTU/h
Elements5 + 5 + 5 kW (1st stage: 10 kW)
Power supply240 V, 60 Hz, single phase
Element amperage60 A
Minimum circuit ampacity (MCA)85 A
Maximum breaker90 A
Wire gauge4 AWG
MotorECM (Ecotech), 1/2 HP, 5 speeds (3.9 A)
Blower wheel10 x 8 in
HIGH airflow1,275 CFM at 0.2 in w.c.; 1,200 CFM at 0.5 in w.c.
MED-HIGH airflow1,050 CFM at 0.2 in w.c.; 975 CFM at 0.5 in w.c.
MEDIUM airflow900 CFM at 0.2 in w.c.; 825 CFM at 0.5 in w.c.
MED-LOW airflow700 CFM at 0.2 in w.c.; 600 CFM at 0.5 in w.c.
Heating speed (factory)M-LOW at 0.5 in w.c.
Maximum outlet temperature194 °F (90 °C)
Maximum cooling3 tons
Coil locationSupply or return (DIP switch 3)
Dimensions (W x D x H)21 1/2 x 44 x 34 1/2 in (546 x 1,118 x 876 mm)
Supply opening20 x 20 in (508 x 508 mm), warm air plenum
Return opening18 1/2 x 18 1/2 in (470 x 470 mm)
Filter1 disposable 20 x 20 x 1 in filter, included
Thermostat1 or 2 stage heating/cooling, 24 VAC (G, W1, W2, R, Y1, Y2, C)
Shipping weight110 lb (50 kg)
Model numberKLE-02-G015-H3
03 · Before installing

What to know before installing

  • Upflow installation only, per the Lowboy manual.
  • Floor space of 21 1/2 x 44 in (W x D), height of 34 1/2 in, plus the service clearance in the manual.
  • Dedicated 240 V, 60 Hz, single-phase circuit: 85 A minimum ampacity, breaker of no more than 90 A and 4 AWG wire.
  • With a coil, DIP switch 3 is set according to its location (supply or return).
  • Sold alone, the furnace is not a heat pump: it does not qualify for the LogisVert grant.
In the box
  • 1 disposable 20 x 20 x 1 in filter
04 · Documents

Manufacturer documents

05 · See also

Explore the range

Same category
Electric furnaces
See all
Same brand
CONFORTO
See all
06 · Questions

Frequently asked questions

What speed does the motor run at in heating?

Conforto sets the heating speed at the factory to M-LOW, for 0.5 in w.c. We measure the actual pressure in your ducts at commissioning and change the speed if needed.

Can a central humidifier be connected?

Yes. The furnace has a 24 VAC connection for accessories such as a central humidifier.

Does it work with a smart thermostat?

Yes, Conforto lists it as compatible with smart thermostats. The manual calls for a 1 or 2 stage, 24 VAC thermostat, with terminals G, W1, W2, R, Y1, Y2 and C.

How much space should be planned?

The cabinet is 21 1/2 in wide, 44 in deep and 34 1/2 in high, and it installs in upflow only. Add the service clearance in the manual.

Does it qualify for the LogisVert grant?

No, not sold alone: an electric furnace is not a heat pump.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

A 15 kW Conforto Lowboy ECM, installed by AirGreen

Tell us about your project: we check the sizing, confirm availability and send you a quote. Or let our technicians install it for you.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, for any installation
Quote in 24 hby phone or email
Bouchervilleshowroom

Specifications from the manufacturer’s documentation, checked on October 19, 2026.