GREE LIVO+ 115 V R410A wall heat pump The previous generation. Its R32 version: LIVO R32.
This series is not available right now. Here is how it compares with what we sell today, and how we keep the ones already installed running.
- 1model in this collection
- 9,000BTU
- 10/10/6 yrswarranty: compr. / parts / labour
- 1,374GREE installations published
LIVO+ 115 V R410A or LIVO R32? Same capacity, side by side.
Each line pairs the two product pages at the same nominal capacity.
GREE training completed, priority access to original parts. Call us or write to us for service.
The GREE LIVO+ 115 V R410A models still listed.
Availability to confirm with us. Each product page keeps its AHRI number and specifications.
The LIVO+ 115 V R410A, as it was. And what to do with yours.
Drag, click, compare. Every figure comes from the product pages, the manufacturer’s brochure or a public source named at the bottom of the page.
The LIVO+ 115 V R410A in one page, and the label to look for on yours.
The LIVO+ 115 V, on R410A: a single model, a 9,000 BTU unit on 115 V, heating down to −20 °C. Unfortunately, it is not available at the moment.
No manufacturer brochure is attached to these product pages: the figures come from the pages themselves.
Rating plate- Indoor unit
- LIVS09HP115V1BH
- Outdoor unit
- LIVS09HP115V1BO
- Refrigerant
- R-410A
- Voltage
- 115 V
- Line set
- 1/4 - 3/8 in
- Warranty
- 10 / 10 / 6 yrs
Compressor / parts / labour warranty, from the distributor. Figures from each product page.
The LIVO+ 115 V R410A ran on R410A. Today’s GREE wall units run on R-32.
The global warming potential (GWP) compares a refrigerant with CO₂ if it leaks: CO₂ = 1. R‑410A is a 50/50 blend of HFC-32 and HFC-125.
About 3× lower warming potential for R‑32.
Its successor on our site: LIVO R32. The thermometer above compares them at the same capacity.
See the LIVO R32Sources: HFC-32 = 675 (Greenhouse Gas Pollution Pricing Act, Schedule 3); R-410A = 2,100 and 50/50 composition (Arkema Forane 410A specification sheet).
You already have a LIVO+ 115 V R410A? Tell us what it does.
Pick what you notice. Each card opens the matching AirGreen service page for wall heat pumps in Greater Montreal.
Prefer to talk? Call us: 514 316-2973.
How loud is a LIVO+ 115 V R410A, really? Put it next to everyday sounds.
Indoor sound level at the lowest and highest fan speed, and outdoor unit level, from the product pages. Reference sounds: Québec.ca (dBA scale).
Will the new one fit where yours is?
Wall-unit and outdoor-unit dimensions from the product pages, converted to centimetres. The installation manual’s clearances come on top: we check them on site.
6 things only the LIVO+ 115 V R410A can tell you. Flip the cards.
What your electrician and your installer will want to know.
Model by model, straight from the product pages. Empty cells mean the page does not give the figure.
| Model | 9,000115 V |
|---|---|
| Voltage | 115 V |
| Line set, liquid – gas | 1/4 - 3/8 in |
| SEER | 16 |
| Indoor sound, low / high | 28 / 42 dB(A) |
| Outdoor sound | 53 dB(A) |
| Wall unit W × D × H | 31.1 × 7.9 × 10.8 in |
| Outdoor unit W × D × H | 33.4 × 12.6 × 21.3 in |
MCA and MOP guide the circuit and breaker; your licensed electrician confirms them on site. Dimensions in inches, width × depth × height.
What people ask us about the GREE LIVO+ 115 V R410A.
Can I still buy a GREE LIVO+ 115 V R410A?
Not right now. The R32 series we sell are on the GREE wall units page.
What changes with the LIVO R32 series?
The refrigerant (R-410A versus R-32), and the figures on each product page: see the side-by-side table above.
I already have one. Who services it?
AirGreen, as a GREE Elite dealer: GREE training completed and priority access to original parts. Call 514 316-2973.
We come and see your home. Then we tell you which GREE to install.
Free on-site estimate, quote within 24 hours, installation by our team.